"The original plan was to host different patches for android x86 support from open source community. A few months after we created the project, we found out that we could do much more than just hosting patches. So we decide[d] to fork our code base that will provide android x86 support on different x86 platforms, and set up a git server to host it. To reflect this major change, we create this new project." - the developers behind the Android-x86 project said on their website.
The main desktop
Highlights of Android-x86 1.6:
· Based on Android 1.6 (Donut);
· Linux kernel 2.6.29 with KMS enabled;
· Support for Wi-Fi connections;
· Graphical user interface for Ethernet configurations;
· Hard drive installer;
· Support for suspend/resume functions (S3 mode);
· Shows the status of the battery on netbooks;
· Support for mouse wheel/cursor;
· ALSA driver for better audio;
· Support for the native resolutions of netbooks;
· Support for netbook's webcams (via V4l2);
· Support for external monitors;
· Automatic mount of external disk drives;
· Support for Bluetooth;
· Proxy support.
Until now, Android-x86 was tested on the following Eee PC models: 701, 701SD. 900, 900A, 901, 904HD, 1000, 1000HE, 1000HD, 1005HAG, S101, T91 (VESA mode, touchscreen works), Eee Top 1602C (VESA mode, touchscreen works) and Lenovo ThinkPad x61 Tablet. As you can see, except for the T91 and Eee Top 1602C models, which run only in VESA mode, all the other models enumerated above can run in their native resolution (1024x600 or 800x480) thanks to the i915 Intel video driver.
How to install Android-x86?
Below is a quick guide that provides you with instructions about how to install the Android-x86 Linux distribution on your Eee PC or home computer. It can be installed on a local/external hard drive or a USB flash drive. If you don't have an external/internal CD-ROM on your system, you can write the ISO image to a USB stick by following our "How to Run Linux from an USB Flash Drive" tutorial.
Insert the CD or USB drive and boot from it (check your BIOS settings for that). At the boot loader select the last option: "Install Android-x86 to harddisk."
Wait for it to load and you'll be asked to choose or create the required partitions. If you install on a USB flash drive and it's not detected, choose the "Detect devices" option. Click OK when done...
On the next screen you can format the partitions with a desired filesystem (ext3, ext2, ntfs and fat32 are supported at this time). EXT3 is recommended. Click OK when done...
Then you will be asked if you want to install the GRUB bootloader, which can also be used to boot another installed operating system. Hit "Yes"...
Wait a few seconds for the system to be installed....
Reboot the machine when the installation is over...
That's it, you're now a proud owner of the Android-x86 operating system. Enjoy!
Download Android-x86 right now from Softpedia.